Des produits

DESCRIPTION

Informations de base

Modèle NON.	SZS20-1.25-Y. Q SZS30-1.25-Y. Q SZS40-1.25-Y. Q
Emplacement du tambour	Chaudière horizontale
Pression	Pression
Niveau de fabrication	UN
Style brûlant	Chaudière à combustion à chambre
Usage	Industriel , Maison , Véhicule
Forfait transport	Nu avec un film plastique
Marque déposée	REACH CHAUDIÈRE
Origine	ChineHenan
Code SH	8402190000
Capacité de production	5000ton/an

Description du produit

Caractéristiques principales
La chaudière de la série SZS est conçue avec des doubles tambours longitudinaux et une structure de chambre de type "D". Le four est placé sur la droite et le banc de tubes de convection est sur la gauche, le surchauffeur est disposé sur le banc de tubes de convection. Le corps est fixé au sous-sol par des supports flexibles au milieu et aux deux extrémités et permet à la chaudière de se dilater horizontalement latéralement. Autour du four se trouve la paroi du tube de refroidissement par eau à membrane. Le four et le banc de tubes sont totalement séparés par la paroi de refroidissement du tube d'eau à membrane sur le côté gauche du four. La partie arrière du faisceau est une structure de décalage clairsemée, la partie avant est une structure alignée. La fumée de la sortie du four pénètre dans la chambre de re-combustion, la zone du banc de tubes de convection, puis de la partie avant gauche entre dans l'économiseur à serpentin fin en spirale et le condenseur, et est finalement évacuée dans l'atmosphère par la cheminée.

Modèle : Chaudière à vapeur à gaz/mazout de type SZS
Structure : WaterTube trois passages
Capacité de vapeur nominale : 10-50 tonnes/h

Pression de vapeur nominale : 1,25/1,6/2,5 MPa.

Température de vapeur nominale : 194/205/220 C

Application: Usine textile, aliments et boissons, produits chimiques, médecine, industrie légère, caoutchouc, usine d'impression et de teinture, usine de papier, transformation du bois, vêtement et blanchisserie, etc.

Numéro de modèle	SZS10-1.25-Y/QSZS10-1.6-Y/QSZS10-2.5-Y/Q	SZS15-1.25-Y/QSZS15-1.6-Y/QSZS15-2.5-Y/Q	SZS20-1.25-Y/QSZS20-1.6-Y/QSZS20-2.5-Y/Q	SZS25-1.25-Y/QSZS25-1.6-Y/QSZS25-2.5-Y/Q	SZS30-1.25-Y/QSZS30-1.6-Y/QSZS30-2.5-Y/Q	SZS35-1.25-Y/QSZS35-1.6-Y/QSZS35-2.5-Y/Q	SZS40-1.25-Y/QSZS40-1.6-Y/QSZS40-2.5-Y/Q
Évaporation nominale(T/h)	dix	15	20	25	30	35	40
Pression nominale(Mpa)	1.25/1.6/2.5	1.25/1.6/2.5	1.25/1.6/2.5	1.25/1.6/2.5	1.25/1.6/2.5	1.25/1.6/2.5	1.25/1.6/2.5
Température de vapeur nominale. (ºC)	194/205/220	194/205/220	194/205/220	194/205/220	194/205/220	194/205/220	194/205/220
Efficacité	>98%	>98%	>98%	>98%	>98%	>98%	>98%
Consommation de diesel(Kg/h)	583	868	1148	1439	1739	2030	2318
Gaz naturel(Nm³/h)	704	1045	1383	1739	2090	2450	2787
Poids (T)	31	41	49	53	65	72	81
Dimensions globales(L*W*D(mm))	7050*3350*3400	8700*3350*3400	9400*3600*3600	11000*3600*3800	11000*3800*4000	12000*4000*4200	12400*4400*4600

Avantages techniques
Le corps SafetyBoiler utilise la circulation forcée dans la zone à haute température pour s'assurer que toutes les zones de chauffage peuvent être refroidies et éviter la vaporisation ; La porte anti-explosion et le détecteur de flamme sont équipés pour un fonctionnement sûr et fiable. Des plaques de peigne sont utilisées entre les deux côtés de la chaudière et du faisceau de tubes pour éviter les fuites de condensat et de gaz causées par l'utilisation de béton réfractaire comme matériau d'étanchéité. Un test d'étanchéité à l'air est effectué avant la livraison en usine pour garantir tout problème de fuite de gaz.
Environmental protectionBig combustion chamber equipped with Low emission combustion burner effectively reduce the NOx to 30mg/m3. Smoke duct and smoke outlet use internal insulation to reduce operating noise.Combustion chamber uses full membrane water cooling wall structure and pressurized combustion without smoke mixture.Energy conservationGood quality alumina silicate fiber and fire clay insulation material are used and the boiler body temperature is controlled below 45ºC and greatly heat loss is reduced. Combustion chamber is designed with narrow distance tube membrane water cooling wall which has good air proof to reduce heat lost and increase boiler thermal efficiency. Internal inspection holes uses high-alumina refractory and manhole cover seal devices, solving superheat problem in this part caused by using refractory bricks.ConvenienceManholes are placed on the front and back side of drums and inspection doors on back side of boiler easy to open for inspection and clean inner and outer parts.Longer lifespanMembrane structure are used in the front and back wall for boiler body and highly increased their lifespan to over 20 years.The key processes including material cutting, rolling, drilling are done by advanced CNC machining process to reduce the assembly stress and extend boiler service lifetime.Flutter prevention fastener is used for high temperature part convection tubes, which avoid convection tube cracking problem.Longitudinal and girth joint adopt advanced automatic submerged-arc welding for good welding quality. All longitudinal and girth joint will be tested by radiographic inspection. Henan Reach Special Equipment is located in the central city of Zhengzhou, Henan Province, China. Our company is a professional trade supplier of industrial equipment such as boilers, with 12 production companies with various qualifications and over 30 employees. Mainly engaged in the design and sales of oil and gas steam boilers, coal/biomass steam boilers, oil and gas thermal oil boilers, coal/biomass thermal oil boilers, electric heating steam boilers, oil and gas hot water boilers, and medium and high temperature hot air furnaces. The manufacturers our company collaborates with are all legitimate production enterprises with A-level and B-level qualifications for Chinese boiler manufacturing. They have various certifications both domestically and internationally, including CE certification, ASME certification, etc., which can fully meet the matching requirements for boilers in various production environments in different countries. The factories our company collaborates with are all based on the manufacturing and production of various pressure vessels such as steam boilers, thermal oil boilers, and autoclaves. We have established an industrial system that integrates product development, engineering project design, equipment manufacturing, engineering installation, system debugging, pre-sales, sales, and after-sales services. Our company's products are not only sold and widely praised in the domestic market of China, but also exported to more than 60 countries and regions such as South Korea, Vietnam, Myanmar, Mongolia, the Philippines, and Indonesia, receiving recognition and pursuit from customers. I believe that our company can bring objective benefits to customers with advanced technology, excellent equipment, excellent products, and exquisite services. We look forward to long-term friendly cooperation with friends from various countries! Welcome to our store! Q1: What about after sales service, such as installation and commissioning?Answer:(1)English manual, drawings are supplied with boiler. (2)Engineers are able to instruct installing and commissioning abroad.Q2: What are the main products?Answer:(1)Oil fired steam boiler, capacity from 0.1t-20t (2) Gas fired steam boiler, capacity from 0.1-20t (3) Electric steam generator, capacity from 36kw-28800kwQ3: How to insure your product quality?Answer:(1)Strength calculation report with applied materials information; (2)100%NDT(non-destructive inspection) report of steel plate, tube and welding rod; (3)100% X-ray inspection(welding seam): ensure the quality of entire boiler; (4)Hydrostatic test: ensure the standard working pressure and safety; (5)Third-party inspection report; (6)Passed ISO, ASME certifications